Rilevamento radar degli ostacoli

A) Correct software installed & activated:

• Ensure the PL2303_Prolific_DriverInstaller, USB to the serial prolific driver, has been installed. This can be downloaded from here in the .ISO file you will find the “Driver” folder which contains the required driver.

[If an error occurs when using Microsoft Windows 11 check out the corresponding Tech Tips here.]

• The radar system must be active (green status LED illuminated) to allow a connection.

B) There is a system error, possible issues:

• Sensor or extension cable not connected.
  Action: Check all connectors are plugged together fully.
• No data connection between sensor and display.
  Action: Check for damage on connectors and cable.
• No power connection to the sensor.
  Action: Check for damage on connectors and cable.
• Data corruption in the sensor.
  Action: Consult Brigade for advice.