- Home
- »
- Detection Systems
- »
- Radar Predict
- »
- RP-001 (7500,7625)
Radar Predict
IP69K
Radar Predict AI Sensor System
Left Side: for right-hand drive vehicles
Model |
Part Number |
| RP-001: 77GHz Radar Predict sensor system with AI | 7500 |
Right Side: for left-hand drive vehicles
Model |
Part Number |
| RP-010: 77GHz Radar Predict sensor system with AI | 7625 |
Voltage
9-32Vdc
Detection
Length: 37m
Width: 4.5m
Size (WxHxD)
Sensor size: 115 x 95 x 41mm
Sensor size with bracket: 200 x 110 x 43.5mm
Display size with bracket: 131 x 63 x 42mm
Durability
IP69K
Warranty
2 years
- 9-32Vdc
- Detection alert length: 37m
- Detection width: 4.5m
- Sensor size (WxHxD): 115 x 95 x 41mm
- Sensor size with bracket (WxHxD): 200 x 110 x 43.5mm
- Display size with bracket (WxHxD): 131 x 63 x 42mm
- IP69K sensor
- 2 year warranty
Features
- 180° cyclist side detection
- Calculates if a collision is likely in the nearside blindspot
- Covers nearside of a vehicle
- 3 stage Visual alert when a cyclist is detected
- Audible and visual alert when collisions predicted
- Differentiates between cyclists and vehicles/other road users
- Designed for rigid and articulated vehicles
- System active under 30Km/h
- Quick and easy installation
- Compact and rugged design for harsh environments
- Automatic trailer recognition
- Operating frequency: 76-77GHz
- Adjustable display volume
Contents
- 1x dual radar sensor unit
- 1 x Inertial measurement unit module
- 1 x display
- 1 x radar bracket
- Radar cable
Durability & Standards
- Operating temperature: -40 to +85°C
- CE marked
- UKCA marked
- FCC approved
- IC approved
- E-Marked: UNECE R10 compliant
- Complies with UNECE reg151 requirements
- Meets 2024 Direct Vision Standard BSIS requirements
Power
- Power consumption: 6.5 Watts
Product Resources
Product Data
Product Card
English
American
Canadian
Français Canadien
Nederlands
Deutsch
Italiano
Polski
Español
R151 Compliance
The detection area is 40m forward and 40m rear of the sensor. As required by R151, the area in which warnings are given to the driver are split in to 3 zones, each measured from the vehicle front bumper (0m).
The software is set to comply with R151 when the sensors are installed in the position specified in the installation manual, i.e -2.35m to -4.35m (as per blue arrow).
- Zone 1: 2m ~ -7m (9m long)
- Zone 2: -7m ~ -30m (23m long)
- Zone 3: 2m ~ 7m (7m long)
Zones 1, 2 & 3 are the detection zones where the audible alerts are given to the driver as required by R151.
If the radar sensor is mounted inside the *good position* (blue arrow), each zones are defined as following:
All Products
Comprehensive, quality and reliable safety products for commercial vehicles and mobile plants.
Contact Brigade
Would you like to contact Brigade Electronics? Please use one of the options on our contact page.
Warranties
Brigade's products are reliable. We provide two, three, five year and, in the case of some products, replacement warranties.
